TPZ152/64

TPZ152/64

65,000.00

Out of stock

Arrayable 2 Way 15″ Full Range Loudspeaker for Installation Applications

  • Arrayable 2 way full range loudspeaker for installation applications
  • Rotatable waveguide with 60° H x 40° V dispersion
  • 650 Watts continuous, 2,600 Watts peak power
  • Carbon fibre loaded 15″ low frequency driver with inside/outside wound coil
  • Titanium dome 1.4″ neodymium motor compression driver
  • Multiple array configurations for extended coverage
  • Switchable passive/bi-amp operation for flexibility of use
  • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
  • Architecturally styled powder coated perforated steel mesh grille
  • Neutrik speakON* NL4 and barrier strip connectors
  • 10-Year Warranty Program*
  • Designed and engineered in the U.K.

Out of stock

Categories: , ,

Description

My default image

PRAGUE TPZ152/64

The 2 way full range TPZ152/64 is a switchable passive/bi-amp 15″ 2,600 Watt arrayable loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. The TPZ152/64 is designed to work in conjunction with TURBOSOUND loudspeaker management systems, providing optimal FOH performance, as well as offering considerable flexibility to readily adapt to varying venue requirements.

The TPZ152/64 arrayable loudspeaker features a carbon fibre loaded 15″ low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response, and a titanium dome 1.4″ neodymium motor high frequency compression driver mounted on a rotatable 60° horizontal by 40° vertical waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch.

Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (5⁄8″) birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M10 threaded rigging points are provided for suspension in any orientation, or mounting with dedicated brackets – available separately. The rear panel connector plate carries Neutrik speakON* NL4 and barrier strip connectors for input and link connections to additional enclosures.

Architecture & Engineering Specifications

The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 15″ (394 mm) LF driver and one 1.4″ (36 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be fl at within ±3 dB from 41 Hz to 18 kHz and within -10 dB from 35 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 60° H x 40° V, rotatable. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 75 Watts continuous, 300 Watts peak, LF: 650 Watts continuous, 2,600 Watts peak; passive: 650 Watts continuous, 2,600 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 134 dB, LF: 131 dB; passive: 131 dB. Dimensions: 781 mm high x 419 mm wide x 503 mm deep (30.7″ x 16.5″ x 19.8″). Net weight: 26.8 kg (59.0 lbs). The loudspeaker system shall be the TURBOSOUND TPZ152/64. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

MENU
DEMO