-
Out of stock
SHOWTEC BEHRINGER & MIDAS LIMITED BUNDLE PROMO. -
Out of stock
SHOWTEC BEHRINGER & MIDAS LIMITED BUNDLE PROMO. -
Out of stock
SHOWTEC BEHRINGER & MIDAS LIMITED BUNDLE PROMO. -
Out of stock
Product Features
- Power and accessory kit helps you easily connect TC Helicon vocal effect pedals in combination
- Conveniently connect up to four vocal effect pedals together at once with minimal cable clutter
- Ideal for use with VOICETONE SINGLES
- Includes a 12 V / 1 A power supply, three DC daisy-chaining connectors and 3 short XLR cables
- Powerful enough to run a VOICETONE SINGLE coupled to a large TC Helicon multi-FX unit like the VOICELIVE 2, VOICELIVE 3, or VOICELIVE TOUCH 2
-
Out of stock
Product Features
- Personal monitoring system hub with PoE remote powering for up to 4 DP48 personal mixers and compatible stage boxes
- AES50 IN and THRU ports for cascading hubs or stage boxes with 48 bidirectional channels at 48/44.1 kHz
- 16 balanced analogue outputs for sending 4x2 personal stereo mixes to IEM transmitters in the side rack
- Channel naming and Group assignments can be distributed from compatible M32 consoles
- Midas DL8 Stage Boxes can be connected and powered from ports 1-4
- Personal mix outputs can be monitored via AES50 upstream to connected consoles
- Supports remote control forwarding of a DP48 personal mixer from another DP48
- Front panel buttons for sending signals to analogue output groups 1-4, for StageConnect and for AES50-A upstream
- StageConnect output with phantom power for connecting other StageConnect devices, sharing 32-channel audio, 24-Bit uncompressed PCM, 44.1/48 kHz, at sub-milisecond latency, over any standard XLR microphone or DMX cable
- Remote operation via shielded CAT5e cable up to 260 ft / 80 m length recommended
- Features Neutrik etherCON* AES50 network ports
- Rugged 1U chassis for durability in portable applications
- Auto-ranging universal switch-mode power supply
-
Out of stock
Product Features
- Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
- Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Allows cascading with other StageConnect boxes, such as DN4816-I and DN4816-O for more analogue inputs and outputs
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave modes offer 8x8 or 16x8 channel configurations to be used with StageConnect-enabled mixing consoles, stage boxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
-
Out of stock
Product Features
- Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
- Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue line inputs feeding the StageConnect bus
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave mode for use with StageConnect-enabled mixing consoles, stageboxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect bus and from analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
-
Out of stock
Product Features
- Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
- Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
- Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
- External power supply for standalone use and offering remote power on the StageConnect Master output
-
Out of stock
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (550 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 550 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Analogue 8 Input, 8 Output Card with Midas Microphone Preamplifiers and D-Type Connectors
- Award-winning Midas microphone preamplifiers with switchable +48 V phantom power
- Low latency 24 bit 96 kHz ADC and DAC converters
- 8 inputs with selectable microphone or line level on a 25 way D-type connector
- 8 electronically balanced line outputs on a 25 way D-type connector
- High output current drive for long cable runs
- +48 V and Output mute LEDs per channel with remote status monitoring 25 way D-type connector
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Analogue 8 Input, 8 Output Card with 1/4" TRS Connectors
- 8 electronically balanced line inputs and outputs on 1/4" TRS connectors
- Low latency 24 bit 96 kHz ADC and DAC converters
- High common mode rejection line inputs
- High output current drive for long cable runs
- Output mute LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
8 Analogue Line Output Card
- 8 electronically balanced outputs on Neutrik* XLR connectors
- Low latency 24 bit 96 kHz DAC converters
- High output current drive for long cable runs
- Output mute and channel check LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (5 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 5 metres
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (30 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 30 metres
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (1 Metre
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 1 metre
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (10 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik* etherCON connectors
- Length 10 metres
- Designed and engineered in the U.K.
