-
Out of stock
SHOWTEC BEHRINGER & MIDAS LIMITED BUNDLE PROMO. -
Out of stock
SHOWTEC BEHRINGER & MIDAS LIMITED BUNDLE PROMO. -
Out of stock
SHOWTEC BEHRINGER & MIDAS LIMITED BUNDLE PROMO. -
Out of stock
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (550 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 550 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Analogue 8 Input, 8 Output Card with Midas Microphone Preamplifiers and D-Type Connectors
- Award-winning Midas microphone preamplifiers with switchable +48 V phantom power
- Low latency 24 bit 96 kHz ADC and DAC converters
- 8 inputs with selectable microphone or line level on a 25 way D-type connector
- 8 electronically balanced line outputs on a 25 way D-type connector
- High output current drive for long cable runs
- +48 V and Output mute LEDs per channel with remote status monitoring 25 way D-type connector
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Analogue 8 Input, 8 Output Card with 1/4" TRS Connectors
- 8 electronically balanced line inputs and outputs on 1/4" TRS connectors
- Low latency 24 bit 96 kHz ADC and DAC converters
- High common mode rejection line inputs
- High output current drive for long cable runs
- Output mute LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
8 Analogue Line Output Card
- 8 electronically balanced outputs on Neutrik* XLR connectors
- Low latency 24 bit 96 kHz DAC converters
- High output current drive for long cable runs
- Output mute and channel check LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (5 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 5 metres
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (30 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 30 metres
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (1 Metre
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 1 metre
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (10 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik* etherCON connectors
- Length 10 metres
- Designed and engineered in the U.K.
-
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (200 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 200 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Dual 48 Channel Personal Monitor Mixer with SD Card Recorder, Stereo Ambience Microphone and Remote Powering
- Dual 48 channel personal monitor mixer compatible with Midas personal monitoring system hubs
- 12 stereo groups enable rapid creation and balancing of personal mixes from fully configurable stem groups
- Dual mix feature allows independent control of two complete monitor mixes
- Integrated SD card interface for stereo recording and playback of rehearsal sessions and performances
- Built-in stereo ambience microphone provides on-stage sound feed to remove sense of isolation with in-ear monitors
- Studio-quality reverb adds spatial ambience to personal in-ear mixes, independent from main console
- Remotely powered via direct AES50 connection from Midas hubs featuring Power over Ethernet (PoE)
- Separate DC power supply allows daisy-chaining of DP48 personal monitor mixers and use without any PoE hub
- Compatible with any 44.1/48 kHz AES50-equipped devices including Midas and Behringer digital consoles and I/O boxes
- Midas PRO SERIES and M32 console input channel labelling and colour information transmitted to DP48 personal monitor mixer via AES50 input channels
- AES50 return channels allow personal mixes to be sent back to the console or hub for connection to wireless IEM transmitters
- Remote operation up to 100 m via screened CAT5/5e cable
- Remote setup and control of DP48 personal monitor mixer via Midas hubs
- Full remote control of another DP48 when both connected to the same hub or used in daisy chain configuration
- High-contrast 2.4" colour TFT display screen provides clear overview of mix parameters, meters and group assignments
- Analogue stereo auxiliary input for local click track
- High power headphone output for use in all stage monitoring environments
- Fully adjustable limiter allows for safe monitoring levels within sound exposure limits
- Mounts securely on microphone stand with DP48MB adaptor (not included)
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Mounting Bracket for Midas DP48 Personal Monitoring Mixer
- Mounting bracket for Midas DP48 Personal Monitoring Mixer
- Attaches to standard mic, music or drum stands
- Dual headphone hangers and integrated cable guide
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
PRO SERIES PRO9-CC-TP
Live Digital Console Control Centre with 88 Input Channels, 35 Mix Buses, 96 kHz Sample Rate and Touring Grade Road Case
- Live performance digital console control centre with up to 88 simultaneous input channels
- 35 time-aligned and phase-coherent mix buses
- HyperMAC and AES50 networking allows up to 288 inputs and 294 outputs @ 96 kHz Sample Rate
- Touring grade road case featuring marine grade plywood, aluminium extrusions and composite density protective foam
- HyperMAC router with 192 bidirectional channels over copper and optical fibre
- Provides dual redundant snake connection to DL371PRO9 Audio System Engine
- Snake connections up to 500 m with optical fibre or 100 m with CAT5/5e cable
- 10 VCA (variable control association) and 6 POPulation groups
- Up to 36 assignable 1/3 octave KLARK TEKNIK DN370 graphic equalisers
- Up to 8 multi-channel digital signal processing effects engines
- 29 MIDAS PRO motorised 100 mm faders
- 2 daylight viewable 15” full colour TFT display screens
- Fully interpolated touch sensitive controls
- Optional wireless remote control with MIDAS MIXTENDER App for iPad*
- Three bay auto-ranging universal switch-mode power supply with N+1 redundancy
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Live Digital Console Control Centre with 88 Input Channels, 35 Mix Buses and 96 kHz Sample Rate
- Live performance digital console control centre with up to 88 simultaneous input channels
- 35 time-aligned and phase-coherent mix buses
- HyperMAC and AES50 networking allows up to 288 inputs and 294 outputs @ 96 kHz Sample Rate
- HyperMAC router with 192 bidirectional channels over copper and optical fibre
- Provides dual redundant snake connection to DL371PRO9 Audio System Engine
- Snake connections up to 500 m with optical fibre or 100 m with CAT5/5e cable
- 10 VCA (variable control association) and 6 POPulation groups
- Up to 36 assignable 1/3 octave KLARK TEKNIK DN370 graphic equalisers
- Up to 8 multi-channel digital signal processing effects engines
- 29 MIDAS PRO motorised 100 mm faders
- 2 daylight viewable 15” full colour TFT display screens
- Fully interpolated touch sensitive controls
- Optional wireless remote control with MIDAS MIXTENDER App for iPad*
- Three bay auto-ranging universal switch-mode power supply with N+1 redundancy
- 10-Year Warranty Program
- Designed and engineered in the U.K
