Audio System Modular I/O Blanking Plate
- Audio System Modular I/O blanking plate
- Compatible with MIDAS PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
-
Out of stock
- Single width 500 Series blank plate
- Protects and covers unused slots of your MIDAS L6 & L10
- Fits most 500 Series rack mount chassis
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Product Features
- Power and accessory kit helps you easily connect TC Helicon vocal effect pedals in combination
- Conveniently connect up to four vocal effect pedals together at once with minimal cable clutter
- Ideal for use with VOICETONE SINGLES
- Includes a 12 V / 1 A power supply, three DC daisy-chaining connectors and 3 short XLR cables
- Powerful enough to run a VOICETONE SINGLE coupled to a large TC Helicon multi-FX unit like the VOICELIVE 2, VOICELIVE 3, or VOICELIVE TOUCH 2
-
Out of stock
Ruggedised Cat5e UTP Network Cable (1 Metre
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 1 metre
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (5 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 5 metres
- Designed and engineered in the U.K.
-
Out of stock
LED18-4RA LED task lamp features a 18″ adjustable gooseneck shaft and Littlite’s proprietary LLX connector, allowing rotation of the right angled 4 pin XLR connection in 45° increments.
- Littlite* 18XR-4-LED lamp with 18" gooseneck shaft
- White LED illumination with additional red LEDs for warm lighting
- Rotatable right-angled 4 pin male XLR connector
- Less than 2 Watt power consumption @ 12 Volts DC
- 10-year warranty program
- Designed and engineered in the U.K.
-
Out of stock
Set of 8 Pushbutton Switches with LCD Display and LED Backlight
- Momentary action pushbutton switch with tactile feedback
- 36 x 24 pixel resolution dot matrix graphic LCD display
- RGB LED backlight offers high visibility in all lighting conditions
- FSTN LCD Glass for high contrast and wide viewing angle
- 8 distinct displayable LED colours
- 2 wire serial data interface with up to 1 MHz operation
- Replacement for Screenkeys* RGB24T LCD Switch in Midas XL8 and PRO SERIES consoles
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (10 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik* etherCON connectors
- Length 10 metres
- Designed and engineered in the U.K.
-
Out of stock
Littlite LED Lamp with 12" Gooseneck Shaft and Right-Angled 4 Pin XLR Connector
- Littlite* 12XR-4-LED lamp with 12" gooseneck shaft
- White LED illumination with additional red LEDs for warm lighting
- Rotatable right-angled 4 pin male XLR connector
- Less than 2 Watt power consumption @ 12 Volts DC
- 10 year warranty program
- Designed and engineered in the U.K.
-
Mounting Bracket for Midas DP48 Personal Monitoring Mixer
- Mounting bracket for Midas DP48 Personal Monitoring Mixer
- Attaches to standard mic, music or drum stands
- Dual headphone hangers and integrated cable guide
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (30 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 30 metres
- Designed and engineered in the U.K.
-
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (200 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 200 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (550 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 550 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
- Compact 500 Series premium compressor/limiter with dynamic presence control
- Fully variable dynamic presence feature preserves high mid-range frequencies for a more natural sound during compression
- Dynamic presence control adds “air” to vocals without introducing noise or pumping effects and reduces the risk of feedback during live performances
- Manual envelope controls with linear peak-sensing compression or easy to use Auto mode with RMS compression
- Soft or hard knee compressor response with selection switch
- Sidechain high pass filter with selection switch eliminates undesirable low frequency compression artefacts
- High performance electronically balanced input stage with high common-mode rejection
- Discrete transistor driven transformer balanced output stage
- Precision gain reduction and signal level metering
- True hardware bypass selection switch removes all circuitry from the signal path when compression is not required
- Power up mute relays prevent switch on thumps
- Premium quality components throughout for a crystal-clear audiophile signal path
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
500 Series 4 Band Fully Parametric Equaliser Based on Midas HERITAGE 3000
- Compact 500 Series module with enhanced MIDAS HERITAGE 3000 four band fully parametric equaliser
- Class leading equaliser acclaimed for it's warm and responsive character with fast easy setup
- Precision dual concentric controls give instant access to fully variable gain and frequency settings
- Bass and treble bands with selection switches for bell or shelving responses
- Fully variable bandwidth controls on all four bands in bell mode
- Discrete transistor driven transformer balanced output
- High performance electronically balanced input stage with high common-mode rejection
- Ultra low noise design using premium quality op-amps
- True hardware bypass selection switch removes all circuitry from the signal path when equalisation is not required
- Power up mute relays prevent switch on thumps
- Advanced design with low power consumption gives extended component life
- Premium quality components throughout for a crystal-clear audiophile signal path
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
MICROPHONE PREAMPLIFIER 502
- High performance, compact 500 Series premium MIDAS microphone/line preamplifier
- Award-winning MIDAS amp has been enhanced with quad discrete ultra low noise input transistor
- Legendary MIDAS input allows up to +24 dBu signal levels with no pad while featuring the much loved soft clipping characteristic
- Classic MIDAS XL4 swept low and high pass filters with independent selection switches
- Switchable electronic or discrete transistor driven transformer balanced output for sonic flexibility
- Unique twin precision 11 segment LED circular input and output level metering
- High accuracy rotary switch gain control with 60 dB range in 5 dB steps
- Output gain trim with ±20 dB range controls input and output stage colouration
- Total gain range is an amazing -20 dB to +80 dB easily accommodating low output mics
- Large gain trim knobs provide precise control of input and output gains
- Illuminated switches for filters, +48V, polarity reverse and electronic/transformer output select
- 10-year warranty program