Audio System Modular I/O Blanking Plate
- Audio System Modular I/O blanking plate
- Compatible with MIDAS PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
-
Out of stock
- Single width 500 Series blank plate
- Protects and covers unused slots of your MIDAS L6 & L10
- Fits most 500 Series rack mount chassis
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Product Features
- Power and accessory kit helps you easily connect TC Helicon vocal effect pedals in combination
- Conveniently connect up to four vocal effect pedals together at once with minimal cable clutter
- Ideal for use with VOICETONE SINGLES
- Includes a 12 V / 1 A power supply, three DC daisy-chaining connectors and 3 short XLR cables
- Powerful enough to run a VOICETONE SINGLE coupled to a large TC Helicon multi-FX unit like the VOICELIVE 2, VOICELIVE 3, or VOICELIVE TOUCH 2
-
Out of stock
Ruggedised Cat5e UTP Network Cable (1 Metre
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 1 metre
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (5 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 5 metres
- Designed and engineered in the U.K.
-
Out of stock
LED18-4RA LED task lamp features a 18″ adjustable gooseneck shaft and Littlite’s proprietary LLX connector, allowing rotation of the right angled 4 pin XLR connection in 45° increments.
- Littlite* 18XR-4-LED lamp with 18" gooseneck shaft
- White LED illumination with additional red LEDs for warm lighting
- Rotatable right-angled 4 pin male XLR connector
- Less than 2 Watt power consumption @ 12 Volts DC
- 10-year warranty program
- Designed and engineered in the U.K.
-
Out of stock
Set of 8 Pushbutton Switches with LCD Display and LED Backlight
- Momentary action pushbutton switch with tactile feedback
- 36 x 24 pixel resolution dot matrix graphic LCD display
- RGB LED backlight offers high visibility in all lighting conditions
- FSTN LCD Glass for high contrast and wide viewing angle
- 8 distinct displayable LED colours
- 2 wire serial data interface with up to 1 MHz operation
- Replacement for Screenkeys* RGB24T LCD Switch in Midas XL8 and PRO SERIES consoles
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (10 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik* etherCON connectors
- Length 10 metres
- Designed and engineered in the U.K.
-
Out of stock
Littlite LED Lamp with 12" Gooseneck Shaft and Right-Angled 4 Pin XLR Connector
- Littlite* 12XR-4-LED lamp with 12" gooseneck shaft
- White LED illumination with additional red LEDs for warm lighting
- Rotatable right-angled 4 pin male XLR connector
- Less than 2 Watt power consumption @ 12 Volts DC
- 10 year warranty program
- Designed and engineered in the U.K.
-
Mounting Bracket for Midas DP48 Personal Monitoring Mixer
- Mounting bracket for Midas DP48 Personal Monitoring Mixer
- Attaches to standard mic, music or drum stands
- Dual headphone hangers and integrated cable guide
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Ruggedised Cat5e UTP Network Cable (30 Metres)
- Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
- Length 30 metres
- Designed and engineered in the U.K.
-
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (200 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 200 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Set of 5 High-Endurance, Touch-Sensitive 100 mm Motorised Faders (550 mm Cable)
- Touch-sensitive Motorised 100 mm Fader with 550 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
- Compact 500 Series premium compressor/limiter with dynamic presence control
- Fully variable dynamic presence feature preserves high mid-range frequencies for a more natural sound during compression
- Dynamic presence control adds “air” to vocals without introducing noise or pumping effects and reduces the risk of feedback during live performances
- Manual envelope controls with linear peak-sensing compression or easy to use Auto mode with RMS compression
- Soft or hard knee compressor response with selection switch
- Sidechain high pass filter with selection switch eliminates undesirable low frequency compression artefacts
- High performance electronically balanced input stage with high common-mode rejection
- Discrete transistor driven transformer balanced output stage
- Precision gain reduction and signal level metering
- True hardware bypass selection switch removes all circuitry from the signal path when compression is not required
- Power up mute relays prevent switch on thumps
- Premium quality components throughout for a crystal-clear audiophile signal path
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
500 Series 4 Band Fully Parametric Equaliser Based on Midas HERITAGE 3000
- Compact 500 Series module with enhanced MIDAS HERITAGE 3000 four band fully parametric equaliser
- Class leading equaliser acclaimed for it's warm and responsive character with fast easy setup
- Precision dual concentric controls give instant access to fully variable gain and frequency settings
- Bass and treble bands with selection switches for bell or shelving responses
- Fully variable bandwidth controls on all four bands in bell mode
- Discrete transistor driven transformer balanced output
- High performance electronically balanced input stage with high common-mode rejection
- Ultra low noise design using premium quality op-amps
- True hardware bypass selection switch removes all circuitry from the signal path when equalisation is not required
- Power up mute relays prevent switch on thumps
- Advanced design with low power consumption gives extended component life
- Premium quality components throughout for a crystal-clear audiophile signal path
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
MICROPHONE PREAMPLIFIER 502
- High performance, compact 500 Series premium MIDAS microphone/line preamplifier
- Award-winning MIDAS amp has been enhanced with quad discrete ultra low noise input transistor
- Legendary MIDAS input allows up to +24 dBu signal levels with no pad while featuring the much loved soft clipping characteristic
- Classic MIDAS XL4 swept low and high pass filters with independent selection switches
- Switchable electronic or discrete transistor driven transformer balanced output for sonic flexibility
- Unique twin precision 11 segment LED circular input and output level metering
- High accuracy rotary switch gain control with 60 dB range in 5 dB steps
- Output gain trim with ±20 dB range controls input and output stage colouration
- Total gain range is an amazing -20 dB to +80 dB easily accommodating low output mics
- Large gain trim knobs provide precise control of input and output gains
- Illuminated switches for filters, +48V, polarity reverse and electronic/transformer output select
- 10-year warranty program
-
Out of stock
- 500 series portable chassis for 6 single-width modules
- Advanced audio routing reduces cabling complexity
- Audio output link switches provide cable-free daisy-chain connections between modules
- Compressor bus link switches enable stereo and multi-channel dynamics sidechain linking
- Rugged free-standing chassis with convenient carrying handle for portable applications
- 3U 19" rackmount kit allows installation in recording studios and live touring racks (included)
- Earth lift switch eliminates any ground loop problems
- High power auto-ranging universal switch-mode power supply for use worldwide
- Over-specified ultra-low noise power supply output provides 3.2 A @ ±16 V and 300 mA @ +48 V
- Main and auxiliary inputs and outputs per channel on Neutrik* XLR connectors
- Premium quality components throughout for crystal-clear audiophile signal path
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Tour-Grade Ruggedised and Screened Cat5eNetwork Cable (50 Metre Reel)
- Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
- Length 50 metres
- Tested for both AES50 and EtherSound* audio networking
- Dual shielding for protection against EMI and ESD interference
- Dual jacket construction with PUR and FRNC layers for enhanced cable resilience
- Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
- Robust and lightweight Schill* cable drum, with auxiliary winder and integrated break
- Extend two 50 m cables to 100 m using optional Neutrik NE8FF connector (not included)
- Rubber caps on etherCON connectors cover terminals during setup and transport
- Velcro* straps secure cable ends during transportation
- 1-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Analogue 8 Input, 8 Output Card with 1/4" TRS Connectors
- 8 electronically balanced line inputs and outputs on 1/4" TRS connectors
- Low latency 24 bit 96 kHz ADC and DAC converters
- High common mode rejection line inputs
- High output current drive for long cable runs
- Output mute LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
500 Series Rackmount Chassis for 10 Modules with Advanced Audio Routing
- 500 series rackmount chassis for 10 single-width modules
- Advanced audio routing reduces cabling complexity
- Audio output link switches provide cable-free daisy-chain connections between modules
- Compressor bus link switches enable stereo and multi-channel dynamics sidechain linking
- Rugged 3U rackmount chassis for durability in portable applications
- Earth lift switch eliminates any ground loop problems
- High power auto-ranging universal switch-mode power supply for use worldwide
- Over-specified ultra-low noise power supply output provides 3.2 A @ ±16 V and 300 mA @ +48 V
- Main and auxiliary inputs and outputs per channel on Neutrik* XLR connectors
- Premium quality components throughout for crystal-clear audiophile signal path
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Analogue 8 Input, 8 Output Card with Midas Microphone Preamplifiers and D-Type Connectors
- Award-winning Midas microphone preamplifiers with switchable +48 V phantom power
- Low latency 24 bit 96 kHz ADC and DAC converters
- 8 inputs with selectable microphone or line level on a 25 way D-type connector
- 8 electronically balanced line outputs on a 25 way D-type connector
- High output current drive for long cable runs
- +48 V and Output mute LEDs per channel with remote status monitoring 25 way D-type connector
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
12 Input Analogue Live and Studio Mixer with Midas Microphone Preamplifiers
- Live performance and studio recording analogue mixer with 12 input channels
- 8 mono input channels with award-winning Midas microphone preamplifiers
- 2 electronically-balanced stereo line input channels on 1/4" TRS connectors
- 3 band EQ on mono channels with swept mid band
- 2 aux sends with pre/post fader switching
- 60 mm precision long-life faders
- Rugged chassis construction for durability in portable applications
- Auto-ranging universal switch-mode power supply
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
8 Analogue Line Output Card
- 8 electronically balanced outputs on Neutrik* XLR connectors
- Low latency 24 bit 96 kHz DAC converters
- High output current drive for long cable runs
- Output mute and channel check LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
Freighting Crate for MIDAS PRO3/6/9 Live Digital Console Control Centres
- Freighting crate for MIDAS PRO3/6/9 Live Digital Console Control Centres
- Designed and engineered in the U.K.
-
Out of stock
Product Features
- Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
- Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
- Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
- External power supply for standalone use and offering remote power on the StageConnect Master output
-
Out of stock
Product Features
- Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
- Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Allows cascading with other StageConnect boxes, such as DN4816-I and DN4816-O for more analogue inputs and outputs
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave modes offer 8x8 or 16x8 channel configurations to be used with StageConnect-enabled mixing consoles, stage boxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
-
16 Input Analogue Live and Studio Mixer with Midas Microphone Preamplifiers
- Live performance and studio recording analogue mixer with 16 input channels
- 12 mono input channels with award-winning Midas microphone preamplifiers
- 2 electronically-balanced stereo line input channels on 1/4" TRS connectors
- 3 band EQ on mono channels with swept mid band
- 2 aux sends with pre/post fader switching
- 60 mm precision long-life faders
- Rugged chassis construction for durability in portable applications
- Auto-ranging universal switch-mode power supply
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
Product Features
- Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
- Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue line inputs feeding the StageConnect bus
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave mode for use with StageConnect-enabled mixing consoles, stageboxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect bus and from analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
-
Dual 48 Channel Personal Monitor Mixer with SD Card Recorder, Stereo Ambience Microphone and Remote Powering
- Dual 48 channel personal monitor mixer compatible with Midas personal monitoring system hubs
- 12 stereo groups enable rapid creation and balancing of personal mixes from fully configurable stem groups
- Dual mix feature allows independent control of two complete monitor mixes
- Integrated SD card interface for stereo recording and playback of rehearsal sessions and performances
- Built-in stereo ambience microphone provides on-stage sound feed to remove sense of isolation with in-ear monitors
- Studio-quality reverb adds spatial ambience to personal in-ear mixes, independent from main console
- Remotely powered via direct AES50 connection from Midas hubs featuring Power over Ethernet (PoE)
- Separate DC power supply allows daisy-chaining of DP48 personal monitor mixers and use without any PoE hub
- Compatible with any 44.1/48 kHz AES50-equipped devices including Midas and Behringer digital consoles and I/O boxes
- Midas PRO SERIES and M32 console input channel labelling and colour information transmitted to DP48 personal monitor mixer via AES50 input channels
- AES50 return channels allow personal mixes to be sent back to the console or hub for connection to wireless IEM transmitters
- Remote operation up to 100 m via screened CAT5/5e cable
- Remote setup and control of DP48 personal monitor mixer via Midas hubs
- Full remote control of another DP48 when both connected to the same hub or used in daisy chain configuration
- High-contrast 2.4" colour TFT display screen provides clear overview of mix parameters, meters and group assignments
- Analogue stereo auxiliary input for local click track
- High power headphone output for use in all stage monitoring environments
- Fully adjustable limiter allows for safe monitoring levels within sound exposure limits
- Mounts securely on microphone stand with DP48MB adaptor (not included)
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
8 Analogue Mic/Line Input Card with Midas Microphone Preamplifiers
- Award-winning Midas microphone preamplifiers with switchable +48 V phantom power
- 8 inputs with selectable microphone or line level on Neutrik* XLR connectors
- Low latency 24 bit 96 kHz ADC converters with overload protection
- +48 V and channel check LEDs per channel
- Compatible with Midas PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
-
Out of stock
12-Input Digital Mixer for iPad/Android Tablets with 4 Midas PRO Preamps, 8 Line Inputs, Integrated Wifi Module and USB Stereo Recorder
- iPad*/Android* tablet controlled 12-input digital mixer for studio and live application
- 4 award-winning Midas PRO microphone preamplifiers
- Built-In Tri-Mode Wifi router for direct operation—no need for external routers
- Dugan*-style Auto-Mixing automatically manages microphone gain sharing
- USB connector for uncompressed stereo WAV recording and playback
- 4 digital signal processing effects engines
- Rack ears and protection bumpers included for flexible rack and onstage applications
- 6 aux buses and main LR with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ
- 2 TRS aux outputs and 2 XLR main outputs plus phones connector
- 40 bit floating point digital signal processing
- Free iOS, Android and PC/Mac*/Linux* apps available for remote operation via Ethernet, LAN or WiFi
- MIDI In/Out allows controlling the mixer via MIDI equipment
- Future firmware updates, incl. new FX “Plug Ins”, downloadable from midasconsoles.com free of charge
- Auto-ranging universal switch-mode power supply
- 10-Year Warranty Program
- Designed and engineered in the U.K.
-
Out of stock
AES3 Digital 8 Input, 8 Output Card with Sample Rate Conversion
- 4 AES3 (AES/EBU) input and 4 AES3 outputs on Neutrik* XLR connectors
- 8 input channels and 8 output channels with sample rate conversion
- External clock synchronisation for input channels
- Word length and clock source options for outputs
- Supports 96 kHz or 48 kHz external sample rate operation
- External sync and channel check LEDs per input channel
- Output Mute and channel check LEDs per output channel
- Compatible with MIDAS XL8, PRO3, PRO6, PRO9, PRO X, DL351 and DL451
- 10-Year Warranty Program
- Designed and engineered in the U.K.